#Tao tao atv will not start how to#

Make sure to keep your hands at a safe distance from the spark plug. You may need a helper to push the starter for you. Crank the engine and watch for a spark.This will ground the spark plug so that it can create a spark. The plug’s metal part must touch the metal on the engine or frame for this to work. Place the spark plug on the cylinder head or near an exposed metal part of the frame.Push the spark plug into the spark plug boot by hand until it is seated. Connect the spark plug with the ignition coil lead.Spark plug sockets are either 5/8 inches (16mm) or 13/16 inches (21mm). Remove the spark plug from the engine.Remove the ignition coil lead boot from the spark plug.If your bike has one, it’s a good idea to close the fuel tank petcock valve as a safety precaution or remove the fuel pump fuse before checking the spark. If you’re uncertain whether the starting issue with your bike is due to a lack of spark or another factor, we suggest consulting this guide. Therefore it’s not enough to assume the spark is not there you need to test it.Īn ATV requires fuel, air, and a spark to start. While you may feel confident that a lack of spark is the issue, remember that other starting issues could be causing similar symptoms. Whether you’ve done this step or not, it’s a good idea to confirm that the ATV indeed lacks a spark before proceeding with troubleshooting. Troubleshooting Guide for an ATV With No Spark 1. Before establishing which part is acting up, there is no need to focus on one single component. Through various tests, you should be able to pinpoint which component is faulty. You will often find a problem with the spark plug, the kill switch, a wire, or a connector. If you assume the worst and begin by removing the stator, you might end up disassembling numerous components unnecessarily. When dealing with electrical issues, it’s always wise to start with the simplest checks. The easiest way of identifying which of the listed components is failing is through elimination. The basic layout of an ATV ignition system. Wiring and connectors connecting these components.When your ATV is not getting a spark, the problem is with one or more of these electrical components: They all have to function correctly, or there will be no spark, or the spark will weaken. Each component in the system is just as important as the other. Your ATV’s ignition system consists of various components that work together to create a spark. What Causes No-Spark or a Weak Spark on an ATV? Can a drained battery result in no spark in an ATV?.What role does the CDI box play in ATV spark production?.

How can I test the ignition coil on my ATV for spark?.Can a bad kill switch cause no spark in my ATV?.

#Tao tao atv will not start how to#

How to Test the Ignition Coil With a Multimeter.

Check the Kill Switch and Other Safety Switches Check for Damaged Wires in the Wiring Harness Check for Loose, Damaged, or Corroded Connectors Ensure the Battery Is Charged and Has Good Ground

Troubleshooting Guide for an ATV With No Spark.

What Causes No-Spark or a Weak Spark on an ATV?.